Characterizing the in vitro biofilm phenotype of Staphylococcus epidermidis isolates from central venous catheters.

Central venous catheter (CVC)-related infections are commonly caused by Staphylococcus epidermidis that is able to form a biofilm on the catheter surface. Many studies involving biofilm formation by Staphylococcus have been published each adopting an own in vitro model. Since the capacity to form a biofilm depends on multiple environmental factors, direct comparison of results obtained in different studies remains challenging. This study characterized the phenotype (strong versus weak biofilm-producers) of S. epidermidis from CVCs in four different in vitro biofilm models, covering differences in material type (glass versus polymer) and nutrient presentation (static versus continuous flow). A good correlation in phenotype was obtained between glass and polymeric surfaces independent of nutrient flow, with 85% correspondence under static growth conditions and 80% under dynamic conditions. A 80% correspondence between static and dynamic conditions on polymeric surfaces could be demonstrated as well. Incubation time had a significant influence on the biofilm phenotype with only 55% correspondence between the dynamic models at different incubation times (48h versus 17h). Screening for the presence of biofilm-related genes only revealed that ica A was correlated with biofilm formation under static but not under dynamic conditions. In conclusion, this study highlights that a high level of standardization is necessary to interpret and compare results of different in vitro biofilm models.

A flow cytometric approach to quantify biofilms.

Since biofilms are important in many clinical, industrial, and environmental settings, reliable methods to quantify these sessile microbial populations are crucial. Most of the currently available techniques do not allow the enumeration of the viable cell fraction within the biofilm and are often time consuming. This paper proposes flow cytometry (FCM) using the single-stain viability dye TO-PRO(®)-3 iodide as a fast and precise alternative. Mature biofilms of Candida albicans and Escherichia coli were used to optimize biofilm removal and dissociation, as a single-cell suspension is needed for accurate FCM enumeration. To assess the feasibility of FCM quantification of biofilms, E. coli and C. albicans biofilms were analyzed using FCM and crystal violet staining at different time points. A combination of scraping and rinsing proved to be the most efficient technique for biofilm removal. Sonicating for 10 min eliminated the remaining aggregates, resulting in a single-cell suspension. Repeated FCM measurements of biofilm samples revealed a good intraday precision of approximately 5 %. FCM quantification and the crystal violet assay yielded similar biofilm growth curves for both microorganisms, confirming the applicability of our technique. These results show that FCM using TO-PRO(®)-3 iodide as a single-stain viability dye is a valid fast alternative for the quantification of viable cells in a biofilm.

Flow cytometric enumeration of bacteria using TO-PRO®-3 iodide as a single-stain viability dye.

Quantification of bacteria using conventional viable plate counting (VPC) is labor-intensive and time-consuming. Flow cytometry (FCM) can be proposed as a faster alternative. This study aimed to develop a flow cytometric, single-stain approach using TO-PRO®-3 iodide (TP3) for the quantification of Staphylococcus aureus, Escherichia coli, and Bacillus subtilis cells. Live or dead bacterial suspensions were stained with TP3 and analyzed using a FACSCalibur flow cytometer. After optimization of staining parameters and instrument settings, an excellent separation of viable and dead cells was achieved for all species. The quantitative performance of the technique was assessed by analyzing serial dilutions of bacterial suspensions using FCM and VPC. A highly linear correlation (r2 > 0.99) was observed between the colony forming units (CFU)/mL as determined by FCM and by VPC over a concentration range of about 104 to 108 CFU/mL. As such, FCM quantification of viable bacteria using TP3 can be considered as an accurate and reliable alternative for VPC. The monostain procedure is easy to apply and cost-effective, and it allows bacterial enumeration in a broad variety of samples.

Importance of biofilm formation and dipeptidyl peptidase IV for the pathogenicity of clinical Porphyromonas gingivalis isolates.

The ability of Porphyromonas gingivalis to cause adult periodontitis is determined by its arsenal of virulence factors. Here, we investigated the importance of biofilm formation and bacterial dipeptidyl peptidase IV (DPPIV) for the pathogenicity of clinical P. gingivalis isolates. In our study, the isolates with biofilm-forming capacity also showed high DPPIV activity in vitro. Moreover, DPPIV activity increased in P. gingivalis biofilms compared to planktonic cells. In a murine subcutaneous abscess model, the biofilm-forming isolates with high DPPIV activity proved to be pathogenic, while the nonbiofilm formers with low DPPIV activity did not induce abscesses. The biofilm-forming ATCC 33277 strain with low DPPIV activity was not pathogenic in mice either. Our results suggest that biofilm formation and DPPIV activity contribute to the pathogenic potential of P. gingivalis. Furthermore, we show that biofilm formation may enhance P. gingivalis virulence through an increased DPPIV activity. Because of their importance for bacterial colonization and growth, biofilm formation and DPPIV activity could present interesting therapeutic targets to tackle periodontitis.

Quantification of Candida albicans by flow cytometry using TO-PRO(®)-3 iodide as a single-stain viability dye.

This study investigated a flow cytometric, single-stain approach to quantify Candida albicans as an alternative for the standard viable plate count. TO-PRO(®)-3 iodide allows an excellent distinction between viable and dead cells. Both quantification methods show a high degree of correlation.

In vitro antimicrobial assessment of Cuban propolis extracts

Propolis is a resinous mixture of different plant exudates collected by honeybees. Currently, propolis is widely used as a food supplement and in folk medicine. We have evaluated 20 Cuban propolis extracts of different chemical types, brown (BCP), red and yellow (YCP), with respect to their in vitro antibacterial, antifungal and antiprotozoal properties. The extracts inhibited the growth of Staphylococcus aureus and Trichophyton rubrum at low µg/mL concentrations, whereas they were not active against Escherichia coli and Candida albicans. The major activity of the extracts was found against the protozoa Leishmania, Trypanosoma and Plasmodium, although cytotoxicity against MRC-5 cells was also observed. The BCP-3, YCP-39 and YCP-60 extracts showed the highest activity against P. falciparum, with 50% of microbial growth (IC50) values of 0.2 µg/mL. A positive correlation between the biological activity and the chemical composition was observed for YCP extracts. The most promising antimicrobial activity corresponds to YCP subtype B, which contains acetyl triterpenes as the main constituents. The present in vitro study highlights the potential of propolis against protozoa, but further research is needed to increase selectivity towards the parasite. The observed chemical composition-activity relationship of propolis can contribute to the identification of the active principles and standardisation of this bee product.

Evaluation of the anti-adhesive effect of milk fat globule membrane glycoproteins on Helicobacter pylori in the human NCI-N87 cell line and C57BL/6 mouse model.

BACKGROUND: The interest in non-antibiotic therapies for Helicobacter pylori infections in man has considerably grown because increasing numbers of antibiotic-resistant strains are being reported. Intervention at the stage of bacterial attachment to the gastric mucosa could be an approach to improve the control/eradication rate of this infection. MATERIALS AND METHODS: Fractions of purified milk fat globule membrane glycoproteins were tested in vitro for their cytotoxic and direct antibacterial effect. The anti-adhesive effect on H. pylori was determined first in a cell model using the mucus-producing gastric epithelial cell line NCI-N87 and next in the C57BL/6 mouse model after dosing at 400 mg/kg protein once or twice daily from day -2 to day 4 post-infection. Bacterial loads were determined by using quantitative real-time PCR and the standard plate count method. RESULTS: The milk fat globule membrane fractions did not show in vitro cytotoxicity, and a marginal antibacterial effect was demonstrated for defatted milk fat globule membrane at 256 µg/mL. In the anti-adhesion assay, the results varied from 56.0 ± 5.3% inhibition for 0.3% crude milk fat globule membrane to 79.3 ± 3.5% for defatted milk fat globule membrane. Quite surprisingly, in vivo administration of the same milk fat globule membrane fractions did not confirm the anti-adhesive effects and even caused an increase in bacterial load in the stomach. CONCLUSIONS: The promising anti-adhesion in vitro results could not be confirmed in the mouse model, even after the highest attainable exposure. It is concluded that raw or defatted milk fat globule membrane fractions do not have any prophylactic or therapeutic potential against Helicobacter infection.

In vitro antimicrobial assessment of Cuban propolis extracts.

Propolis is a resinous mixture of different plant exudates collected by honeybees. Currently, propolis is widely used as a food supplement and in folk medicine. We have evaluated 20 Cuban propolis extracts of different chemical types, brown (BCP), red and yellow (YCP), with respect to their in vitro antibacterial, antifungal and antiprotozoal properties. The extracts inhibited the growth of Staphylococcus aureus and Trichophyton rubrum at low µg/mL concentrations, whereas they were not active against Escherichia coli and Candida albicans. The major activity of the extracts was found against the protozoa Leishmania, Trypanosoma and Plasmodium, although cytotoxicity against MRC-5 cells was also observed. The BCP-3, YCP-39 and YCP-60 extracts showed the highest activity against P. falciparum, with 50% of microbial growth (IC50) values of 0.2 µg/mL. A positive correlation between the biological activity and the chemical composition was observed for YCP extracts. The most promising antimicrobial activity corresponds to YCP subtype B, which contains acetyl triterpenes as the main constituents. The present in vitro study highlights the potential of propolis against protozoa, but further research is needed to increase selectivity towards the parasite. The observed chemical composition-activity relationship of propolis can contribute to the identification of the active principles and standardisation of this bee product.